Skip to main navigation Skip to search Skip to main content

The High-Temperature Electrolysis Integrated Laboratory-Scale experiment

  • Carl M. Stoots
  • , James E. O'Brien
  • , Keith Condie
  • , Lisa Moore-McAteer
  • , Gregory Housley
  • , Joseph J. Hartvigsen
  • , J. Stephen Herring

Research output: Contribution to journal › Article › peer-review

24 Scopus citations

Abstract

The High-Temperature Electrolysis Integrated Laboratory-Scale experiment was designed at the Idaho National Laboratory (INL) and Ceramatec during 2006 and early 2007 and constructed in the spring and summer of 2007. A "half-module," two stacks of 60 cells each, was tested at Ceramatec for 2040 h in June-September 2006 and a full module, four stacks of 60 cells each, was completed in March 2007. Initial shakedown testing of the INL Integrated Laboratory-Scale (ILS) experimental facility commenced on August 22, 2007. Heatup of the first ILS module started at 4:10 PM on September 24, 2007, and ranfor 420 h. The test average H2 production rate was ∼1.3 N · m3/h (Normal cubic meters per hour, where Normal conditions are 273 K and 1 atm) (0.116 kg H2/h), with a peak measured H2 production rate of over 2 N · m3/h (0.179 kg H2/h). Significant module performance degradation was observed over the first 250 h, after which no further degradation was noted for the remainder of the test. Once all test objectives had been successfully met, the test was terminated in a controlled fashion.

Original languageEnglish
Pages (from-to)32-42
Number of pages11
JournalNuclear Technology
Volume166
Issue number1
DOIs
StatePublished - Apr 2009

Keywords

  • High-temperature electrolysis
  • Hydrogen production
  • Integrated Laboratory-Scale experiment

Fingerprint

Dive into the research topics of 'The High-Temperature Electrolysis Integrated Laboratory-Scale experiment'. Together they form a unique fingerprint.

Cite this