Skip to main navigation Skip to search Skip to main content

Synthesis and electrical properties of apatite-type La10Si6O27

  • Bin Li
  • , Wei Liu
  • , Wei Pan

Research output: Contribution to journal › Article › peer-review

56 Scopus citations

Abstract

Lanthanum silicate La10Si6O27 nanopowders are synthesized via co-precipitation process. After the calcination at 900 °C and then removal of La2O3 by acid-washing, pure stoichiometric La10Si6O27 nanopowders are obtained, and are characterized by XRD, BET, TEM and ICP, respectively. The oxy-apatite ceramic with the density higher than 95% can be obtained at rather low sintering temperature of 1300 °C, which has comparable total conductivity with the samples sintered at 1650 °C from the powders prepared by solid-state reaction. Additionally, effects of sintering temperatures on electrical properties are also investigated in detail. It is found, that with the increasing sintering temperature from 1300 °C to 1650 °C, the grain conductivity monotonously increases; while the grain boundary conductivity increases first and then decreases with the maximum value at 1600 °C. The related mechanism is also discussed. Crown

Original languageEnglish
Pages (from-to)2196-2201
Number of pages6
JournalJournal of Power Sources
Volume195
Issue number8
DOIs
StatePublished - Apr 15 2010

Keywords

  • Co-precipitation
  • Electrical conductivity
  • Nanopowders
  • Oxy-apatite
  • Solid oxide electrolyte

Fingerprint

Dive into the research topics of 'Synthesis and electrical properties of apatite-type La10Si6O27'. Together they form a unique fingerprint.

Cite this