Abstract
Training personnel is essential in keeping systems and sites operational and is even more important to keeping personnel safe. However, existing training methods are often ineffective and expose workers to worksite hazards before they are educated on the hazards that may be present. This presentation will focus on training using mixed reality (MR) platforms in a process called familiarization. Familiarization is where already qualified operators are made to understand a new system and its unique characteristics. Physical mockups can reduce problems by providing a method of familiarization outside of the worksite. However, these mockups are expensive, are not truly representative of the work to be done, and are built near the end of an engineering effort after the design has been finished. Combining the tools of digital twin (DT) and extended reality (XR) could provide a solution to these training limitations. The Beartooth testbed project at Idaho National Laboratory (INL) used DT and XR throughout the design process, discovering errors and potential operational constraints due to inadequate design. This testbed is entering the fabrication stage, and the digital engineering team is working to adapt the MR representations for the use of training operators at the Fuel Conditioning Facility. Of the numerous unique challenges facing this testbed, one of the most prominent is that this will be a research and development (R&D) testbed handling fissile material and will be housed in a HAZCAT 2 production facility. The testbed operators will be unfamiliar with operating an R&D asset. Additionally, the testbed is reconfigurable, further complicating the demand on the operators. INL is working with Brigham Young University (BYU) to produce a novel training process to enable operators to be prepared for a readiness assessment on this complex situation. BYU is working with operators and aqueous separations researchers to integrate traditional training performed with piping and instrumentation diagrams with onsite walkthroughs of operations into narrative-driven, interactive trainings that will use MR and DT. Because the MR model is built using the engineering accurate design model, the training will provide trainees with an experience that is truly representative unlike a mockup. Trainees are traditionally walked through unit operations onsite on the fabricated and installed equipment shortly before a readiness assessment. The MR training will enable performing the bulk of the training and familiarization during the fabrication stage instead of after. Additionally, trainees will be able to highlight and search for tag numbers and instrumentation on the MR model and various systems flow, which is colored to help trainees understand various processes in a way that an onsite training would be unable to provide. After the training presentation, the trainees will have an understanding of the technology being used and the process being developed for the training, the challenges of transforming traditional trainings into MR trainings, and INL’s roadmap to produce trainings sufficient for preparing operators for readiness review.
| Original language | American English |
|---|---|
| State | Published - Mar 14 2024 |
| Event | Waste Management Symposia 2024: Waste Management Symposia 2024, Phoenix, AZ, 03/10/2024 - 03/14/2024 - Phoenix, United States Duration: Mar 10 2024 → Mar 14 2024 |
Conference
| Conference | Waste Management Symposia 2024 |
|---|---|
| Country/Territory | United States |
| City | Phoenix |
| Period | 03/10/24 → 03/14/24 |
INL Publication Number
- INL/CON-23-75362
- 169892
Fingerprint
Dive into the research topics of 'SNM Operator Training Using Digital Twin and Extended Reality'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver