TY - JOUR
T1 - Potential accident tolerant fuel candidate
T2 - Investigation of physical properties of the ternary phase U2CrN3
AU - Mishchenko, Yulia
AU - Patnaik, Sobhan
AU - Charatsidou, Elina
AU - Wallenius, Janne
AU - Lopes, Denise Adorno
N1 - Funding Information:
Yulia Mishchenko: Conceptualization, Formal analysis, Methodology, Investigation, Validation, Writing – original draft. Sobhan Patnaik: Methodology, Formal analysis, Writing – review & editing. Elina Charatsidou: Modeling calculations, Writing – review and editing. Janne Wallenius: Supervision, Writing – review & editing. Denise Adorno Lopes: Supervision, Conceptualization, Validation, Analysis, Methodology, Visualization, Formal analysis, Writing – review & editing. Financial support from The Swedish Strategic Research Foundation (SSF) within the SAFETY-project is gratefully acknowledged by Yulia Mishchenko and Janne Wallenius. The high-performance calculations were performed at the CINECA centre on the Marconi system. We are thankful to Mirva Eriksson from the National Spark Plasma Sintering (SPS) facility at Stockholm University, Gunilla Herting from the Division of Surface and Corrosion Science at KTH and Valter Ström from the Department of Materials Science and Engineering at KTH. The authors also wish to acknowledge the work of Fredrik Gustavsson (SWERIM) for assistance with EBSD.
Funding Information:
Financial support from The Swedish Strategic Research Foundation (SSF) within the SAFETY-project is gratefully acknowledged by Yulia Mishchenko and Janne Wallenius. The high-performance calculations were performed at the CINECA centre on the Marconi system.
Publisher Copyright:
© 2022
PY - 2022/9
Y1 - 2022/9
N2 - In the present study, physical properties of the ternary phase U2CrN3 are evaluated experimentally and by modeling methods. High density pellets containing the ternary phase were prepared by spark plasma sintering (SPS). The microstructural and crystallographic analyses of the composite pellets were performed using scanning electron microscopy (SEM), standardised energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD). Evaluation of the mechanical properties was performed by nanoindentation test. The impact of temperature on lattice properties was evaluated using high temperature X-ray diffraction (XRD) coupled with modeling. Progressive change in the lattice parameters was obtained from room temperature (RT) to 673 K, and the result was used to calculate average linear thermal expansion coefficients, as well as an input for the density functional theory (DFT) modeling to reassess the degradation of the mechanical properties. The ab-initio calculation provides an initial assessment of electronic configuration of this ternary phase in a direct comparison with one of UN phase. For this goal, modeling was also employed to evaluate point defect formation energies and electronic charge distribution in the ternary phase. Results indicate that the U2CrN3 phase has similar mechanical properties to UN (Young's, bulk, shear moduli, hardness). No preferential crystallographic orientation was observed in the composite pellet. However, charge electron density distribution highlights the significant directionality of chemical bonds, which is in agreement with the anisotropy and non-linear behaviour of the obtained thermal expansion (α¯(aa) = 9.12 × 10−6/K, α¯(ab) = 5.81 × 10−6/K and α¯(ac) = 6.08 × 10−6/K). As a consequence, uranium was found to be more strongly bound in the ternary structure which may delay diffusion and vacancy formation, promising an acceptable performance as nuclear fuel.
AB - In the present study, physical properties of the ternary phase U2CrN3 are evaluated experimentally and by modeling methods. High density pellets containing the ternary phase were prepared by spark plasma sintering (SPS). The microstructural and crystallographic analyses of the composite pellets were performed using scanning electron microscopy (SEM), standardised energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD). Evaluation of the mechanical properties was performed by nanoindentation test. The impact of temperature on lattice properties was evaluated using high temperature X-ray diffraction (XRD) coupled with modeling. Progressive change in the lattice parameters was obtained from room temperature (RT) to 673 K, and the result was used to calculate average linear thermal expansion coefficients, as well as an input for the density functional theory (DFT) modeling to reassess the degradation of the mechanical properties. The ab-initio calculation provides an initial assessment of electronic configuration of this ternary phase in a direct comparison with one of UN phase. For this goal, modeling was also employed to evaluate point defect formation energies and electronic charge distribution in the ternary phase. Results indicate that the U2CrN3 phase has similar mechanical properties to UN (Young's, bulk, shear moduli, hardness). No preferential crystallographic orientation was observed in the composite pellet. However, charge electron density distribution highlights the significant directionality of chemical bonds, which is in agreement with the anisotropy and non-linear behaviour of the obtained thermal expansion (α¯(aa) = 9.12 × 10−6/K, α¯(ab) = 5.81 × 10−6/K and α¯(ac) = 6.08 × 10−6/K). As a consequence, uranium was found to be more strongly bound in the ternary structure which may delay diffusion and vacancy formation, promising an acceptable performance as nuclear fuel.
UR - https://www.scopus.com/pages/publications/85132727972
U2 - 10.1016/j.jnucmat.2022.153851
DO - 10.1016/j.jnucmat.2022.153851
M3 - Article
AN - SCOPUS:85132727972
SN - 0022-3115
VL - 568
JO - Journal of Nuclear Materials
JF - Journal of Nuclear Materials
M1 - 153851
ER -