Skip to main navigation Skip to search Skip to main content

Engineering heterogeneous microstructures in additively manufactured high entropy alloys for high strength and strain hardenability

  • M. S.K.K.Y. Nartu
  • , A. Chesetti
  • , S. Dasari
  • , A. Sharma
  • , S. A. Mantri
  • , N. B. Dahotre
  • , R. Banerjee

Research output: Contribution to journal › Article › peer-review

26 Scopus citations

Abstract

A novel hierarchically heterogenous microstructure has been achieved by taking advantage of residual stresses in an additively manufactured (AM) Al0.3Ti0.2Co0.7CrFeNi1.7 HEA. This hierarchical heterogeneous microstructure was achieved by a single-step annealing of the AM processed HEA, and is manifested not only via a bimodal distribution of grain sizes, but also via concurrent differences in the morphology and scale of ordered precipitates within the grains. Firstly, at the macroscale, bimodally distributed finer recrystallized and coarser non-recrystallized γ grains were observed. Secondly, at the nanoscale, precipitates of two different types of ordered precipitates, γ′ and σ formed within these grains. Furthermore, two different morphologies of the γ′ precipitates formed in the annealed conditions; equiaxed/near-spherical in the non-recrystallized γ grains resulting from continuous precipitation and rod-like in the recrystallized γ grains resulting from discontinuous precipitation. Uniaxial tensile tests revealed that such heterogeneous microstructures lead to YS values as high as ∼1150 MPa, coupled with very high strain hardening rates, and reasonable tensile ductility. This investigation demonstrates a novel approach for achieving complex hierarchical heterogeneous microstructures in HEAs via AM processing, leading to a competitive balance of mechanical properties.

Original languageEnglish
Article number143505
JournalMaterials Science and Engineering: A
Volume849
Early online dateAug 1 2022
DOIs
StatePublished - Aug 1 2022
Externally publishedYes

Keywords

  • Heterogenous microstructures
  • High entropy alloys
  • L12 precipitates
  • Laser additive manufacturing
  • LENS

Fingerprint

Dive into the research topics of 'Engineering heterogeneous microstructures in additively manufactured high entropy alloys for high strength and strain hardenability'. Together they form a unique fingerprint.

Cite this