Abstract
A computational fluid dynamics model was developed to support the testing of a laboratory-scale waste glass melter. This work focuses on providing an understanding of how the heat flux convected from the melt pool is affected by the forced bubbling and by the foam layer underneath the cold cap formed by reaction gases. Simulations were performed for high-level waste glass simulants with viscosities near the minimum and maximum values that are expected during the Hanford tank waste vitrification campaign. The model resolves the forced convection bubbling in the molten glass and bubbles in the foam that forms beneath the cold cap. The glass with higher viscosity shows the formation of significantly larger bubbles to overcome the higher viscous force. The foaming thickness under the cold cap in higher viscosity cases is cleared less easily than the low viscosity glass case. However, the percentage of foam in contact with the cold cap is decreased at higher viscosity since the higher viscous force tends to prevent direct contact. This trend is reversed when there is no forced convection supplied by the bubblers. The heat fluxes at the bottom of the cold cap are compared for cases with and without forced convection bubbling. As expected, the convective heat flux increases with bubbling, and the average values for heat transfer coefficients from the CFD show reasonable agreement with Nusselt number correlations for flat plates.
| Original language | English |
|---|---|
| Pages | 567-571 |
| Number of pages | 5 |
| State | Published - 2018 |
| Event | International Topical Meeting on Advances in Thermal Hydraulics 2018, ATH 2018 - Held in conjunction with the 2018 American Nuclear Society (ANS) Winter Meeting - Orlando, United States Duration: Nov 11 2018 → Nov 15 2018 |
Conference
| Conference | International Topical Meeting on Advances in Thermal Hydraulics 2018, ATH 2018 - Held in conjunction with the 2018 American Nuclear Society (ANS) Winter Meeting |
|---|---|
| Country/Territory | United States |
| City | Orlando |
| Period | 11/11/18 → 11/15/18 |
Keywords
- Cold cap
- Computational fluid dynamics
- Foam
- Vitrification
- Waste glass melter
Fingerprint
Dive into the research topics of 'Effect of glass viscosity on foaming behavior and heat transfer in a laboratory-scale waste glass melter'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver