TY - JOUR
T1 - Effect of feedstocks and free-fall pyrolysis on bio-oil and biochar attributes
AU - Struhs, Ethan
AU - Sotoudehnia, Farid
AU - Mirkouei, Amin
AU - McDonald, Armando G.
AU - Ramirez-Corredores, M. M.
N1 - Funding Information:
The authors wish to acknowledge Idaho National Laboratory and American Wood Fibers for supplying biomass feedstocks, and Huffman Hazen Laboratory for ultimate and proximate analyses of bio-oil and biochar samples. The authors also wish to acknowledge University of Idaho (UI) for Equipment and Infrastructure Support (EIS) awards and the United States Geological Survey (USGS) for 104b grant, as well as UI College of Natural Resources for providing the GC-MS.
Funding Information:
The authors wish to acknowledge Idaho National Laboratory and American Wood Fibers for supplying biomass feedstocks, and Huffman Hazen Laboratory for ultimate and proximate analyses of bio-oil and biochar samples. The authors also wish to acknowledge University of Idaho (UI) for Equipment and Infrastructure Support (EIS) awards and the United States Geological Survey ( USGS ) for 104b grant, as well as UI College of Natural Resources for providing the GC-MS.
Publisher Copyright:
© 2022 Elsevier B.V.
PY - 2022/9
Y1 - 2022/9
N2 - This study evaluates the potential of a mixed fast and slow pyrolysis process for the conversion of four feedstocks (i.e., hybrid poplar, maple, pine, and sugarcane bagasse) into bio-oil and biochar. The novelty of this study lies within the integration of a free-fall reactor with a batch reactor to take advantage of both fast and slow pyrolysis, and adapt conversion parameters (e.g., carrier gas pressure, feedstock particle size, bulk density, reactor height, and path tortuosity) to maximize the desired product quality and yields. Thermogravimetric analysis was used to provide insight into the thermal degradation of the specified feedstock. Biomass samples were pyrolyzed at 500–550 °C, and the conversion products were evaluated. Biochar properties were characterized using proximate and ultimate analyses and surface area. Bio-oil characterization was obtained by gas chromatography-mass spectrometry (GC-MS), electrospray ionization-mass spectrometry (ESI-MS), Fourier transform infrared (FTIR) spectroscopy, and thermal stability testing. GC-MS identified dominant bio-oil compounds, such as levoglucosan, furfural, and acetic acid. ESI detected molecular weights that are higher than average, necessitating further in-situ cracking (e.g., thermal or catalytic). FTIR showed similar peak patterns and functional groups across the feedstock. The results show that maple produced the greatest biochar yield at 56%, while hybrid poplar had the greatest bio-oil yield at 38%. Among the feedstocks, bio-oil produced from hybrid poplar presents a promising oil with the lowest moisture content (<20%), high phenol content, and the most thermally stable properties, while bio-oil from pine had the next best thermal stability, but with the highest content of levoglucosan (a favorable platform molecule). Analytical results are compared to prior studies to identify the advantages and disadvantages of the free-fall fast pyrolysis reactor. Shortcomings of the current reactor configuration are identified, along with the direction for future studies.
AB - This study evaluates the potential of a mixed fast and slow pyrolysis process for the conversion of four feedstocks (i.e., hybrid poplar, maple, pine, and sugarcane bagasse) into bio-oil and biochar. The novelty of this study lies within the integration of a free-fall reactor with a batch reactor to take advantage of both fast and slow pyrolysis, and adapt conversion parameters (e.g., carrier gas pressure, feedstock particle size, bulk density, reactor height, and path tortuosity) to maximize the desired product quality and yields. Thermogravimetric analysis was used to provide insight into the thermal degradation of the specified feedstock. Biomass samples were pyrolyzed at 500–550 °C, and the conversion products were evaluated. Biochar properties were characterized using proximate and ultimate analyses and surface area. Bio-oil characterization was obtained by gas chromatography-mass spectrometry (GC-MS), electrospray ionization-mass spectrometry (ESI-MS), Fourier transform infrared (FTIR) spectroscopy, and thermal stability testing. GC-MS identified dominant bio-oil compounds, such as levoglucosan, furfural, and acetic acid. ESI detected molecular weights that are higher than average, necessitating further in-situ cracking (e.g., thermal or catalytic). FTIR showed similar peak patterns and functional groups across the feedstock. The results show that maple produced the greatest biochar yield at 56%, while hybrid poplar had the greatest bio-oil yield at 38%. Among the feedstocks, bio-oil produced from hybrid poplar presents a promising oil with the lowest moisture content (<20%), high phenol content, and the most thermally stable properties, while bio-oil from pine had the next best thermal stability, but with the highest content of levoglucosan (a favorable platform molecule). Analytical results are compared to prior studies to identify the advantages and disadvantages of the free-fall fast pyrolysis reactor. Shortcomings of the current reactor configuration are identified, along with the direction for future studies.
KW - Bio-oil
KW - Biochar
KW - Biomass
KW - Free-Fall Pyrolysis
KW - Thermal stability
KW - Thermochemical conversion
UR - https://www.scopus.com/pages/publications/85135087204
UR - https://www.mendeley.com/catalogue/ef6972eb-023c-337c-b09f-c046981bd79c/
U2 - 10.1016/j.jaap.2022.105616
DO - 10.1016/j.jaap.2022.105616
M3 - Article
AN - SCOPUS:85135087204
SN - 0165-2370
VL - 166
JO - Journal of Analytical and Applied Pyrolysis
JF - Journal of Analytical and Applied Pyrolysis
M1 - 105616
ER -