Combining Dense Seismic Arrays and Broadband Data to Image the Subsurface Velocity Structure in Geothermally Active South-Central Utah

South-central Utah is characterized by Quaternary volcanism, current geothermal activity, and unusually high surface heat flux across the region. Additionally, there are three operating geothermal power plants in this region, known as the Sevier thermal area. This setting is very similar to that found in the Coso geothermal area. However, the source and lateral extent of subsurface heat in Utah is poorly understood. We use temporally separated geophone arrays combined with regional broadband data to perform ambient noise seismic tomography to study the subsurface shear velocity structure in the region. We find good recovery of ocean-seism excited Rayleigh wave signals between the periods of 5 and 10 s. For each period, we measure the Rayleigh wave phase velocity and ellipticity across the region using the beamforming methodology and horizontal to vertical (H/V) amplitude ratio. Finally, we combine spline-based 1D shear velocity models inverted using Rayleigh wave phase velocity and H/V measurements on a 2D, beamforming discretized grid to construct a final 3D model. The final 3D model has many similarities to imaged velocity models at the Coso geothermal area. We find a strong correlation between low velocity anomalies and high surface heat flux and geothermal activity. Additionally, we find a laterally continuous low-velocity anomaly between 5 and 15 km depth, which may represent elevated temperature of hundreds of degrees Celsius, partial melt, and/or the presence of water, and a common heat source across the region which likely originates from the mantle.